Safety Guidelines

To ensure the safe operation and maintenance of your Ice Cold Beer machine, please observe the following safety guidelines:

1. Electrical Safety:

• Always disconnect the machine from the power source before performing any maintenance or repair work.
• Use only the specified power requirements (110VAC/60Hz) to avoid electrical hazards or damage to the machine’s components.
• Do not operate the machine if the power cord is damaged or shows signs of wear. Replace immediately with a cord of equivalent specifications.
  

2. Component Handling:

• Ensure that all serviceable parts, including motors, boards, and wiring, are handled with care to prevent accidental damage.
• When replacing or servicing components, avoid contact with any exposed circuitry. Wear anti-static wristbands if possible to prevent static discharge from damaging electronic parts.
  

3. Moving the Machine:

• Always turn off and unplug the machine before relocating it.
• Lift the machine from the designated handles or base, and avoid placing undue stress on the control panel or playfield glass.
• Raise the leg levelers above the base when moving the machine to avoid damage to the levelers.
  

4. Glass Safety:

• The playfield cover is made of tempered glass; however, handle it with care during installation and maintenance.
• Avoid applying excessive pressure to the glass panel, and inspect regularly for chips or cracks. Replace immediately if damage is observed to prevent potential injury.
  

5. Safe Operation:

• Do not place beverages, food, or other liquids on top of the machine to prevent spills that could damage electronic components.
• Ensure that children and players follow proper gameplay instructions and avoid excessive force on joysticks or buttons.
• Do not open the machine’s back or control panel unless necessary for maintenance, and keep unauthorized personnel away from internal components.
  

6. Maintenance Safety:

• Follow all maintenance guidelines as outlined in this manual, particularly for lubrication, cleaning, and component adjustments.
• Use only recommended lubricants and cleaning agents to avoid damaging sensitive parts or affecting gameplay.
• If a mechanical or electronic fault occurs, stop using the machine immediately and contact technical support for assistance.
• By following these safety guidelines, you can help ensure a safe and enjoyable experience with your Ice Cold Beer machine for both players and technicians.