Ball Rod Lubrication

Every 2-4 weeks in a high use environment or 3-6 months in home use the rod the ball travels on and the pivot points should be lubricated.

1. Remove the cover glass
2. Put one drop of PTFE based lubricant (we use DuPont Teflon Multi-Use Lubricant)
3. Put three drops of lubricant at the interface of the two bars
4. Remove the ball from the gate and place it on the rod
5. Replace the glass
6. Turn the machine on
7. Placing the ball on the rod will cause the machine to go into “lost ball mode” which will run the rod and pivots to their extremes.